butech fittings male-female-adapter-pneumatic-and-hydraulic

BuTech Fittings

Butech Fittings

BuTech fittings adapters and couplings are available to connect different sizes and pressure ratings of tubing and pipe. Standard construction is 316 cold – worked stainless steel. These couplings and adapters can be used with NPT pipe, single-ferrule compression tube, medium pressure cone and thread and high pressure cone and thread.

BuTech fittings are available in:

  • Male-Male Adapters
  • Male-Female Adapters
  • Female-Female Adapters
  • Elbows
  • Tees
  • Crosses
  • Bulkhead Fittings

BuTech fittings are also available for subsea and sour gas service.

GET A QUOTE
BuTech Valve Configurator
BuTech Valves Logo
butech fittings male-female-adapter-pneumatic-and-hydraulic

Can’t Find The Product You Need? Just Ask Us!

You May Also Like

Control Line Straightening Tool

Control Line Straightening Tool

The Control Line Straightening Tool is designed to straighten short lengths of control lines manufactured from all varieties of CRA alloys and sizes from ¼”OD to ¾”OD bare line, encapsulated line and multi-line flat packs. Its principal use is for precision straightening over short intervals to be coned and threaded for Butech/Autoclave connections. A secondary use is for general straightening and removal of “kinks” to allow the lines to have good conformance alongside tubing strings.

The Control Line Straightening Tool l employs hydraulic pressure to operate a ram that close contoured plastic die sets on tubing in need of straightening. Dies are custom-made specifically for each size and grade of tubing. Typical die closure force is in the range of 1,000 lbf to 3,000 lbf. Dies can also be fabricated from high-strength aluminum if required.

*The Control Line Straightening Tool is not designed to produce “straight stick” lengths of tubing.

GET A QUOTE
PHC Hydrus Tools Logo
Control Line Straightening Tool

How It Works

The control line straightening tool employs hydraulic pressure to operate a ram that close contoured plastic die sets on tubing in need of straightening. Dies are custom made specifically for each size and grade of tubing. Typical die closure force is in the range of 1,000 lbf to 3,000 lbf. Dies can also be fabricated from high-strength aluminum if required.

Control Line Straightening Tool
Control Line Straightening Tool

Components

  • A hydraulic power unit (HPU) that generates hydraulic energy from a compressed air source.
  • A control line straightening tool that grips tubing requiring straightening and re-shapes it by re-forming its curvature.
  • A hydraulic hose bundle to deliver pressurized oil to the straightener unit and returns it to the HPU.
Model NumberDescription
PHC-HYD-STRAIGHTStraightening Tool
PHC-HYD-B-TSI-.2501/4" Insert for Staightening Tool (Bare Line)
PHC-HYD-B-TSI-.3753/8" Insert for Staightening Tool (Bare Line)
PHC-HYD-B-TSI-.5001/2" Insert for Staightening Tool (Bare Line)
PHC-HYD-B-TSI-.6255/8" Insert for Staightening Tool (Bare Line)
PHC-HYD-E-TSI-.2501/4" Insert for Staightening Tool (Encap sulated line)
PHC-HYD-E-TSI-.3753/8" Insert for Staightening Tool (Encap sulated line)
PHC-HYD-E-TSI-.5001/2" Insert for Staightening Tool (Encap sulated line)
PHC-HYD-E-TSI-.6255/8" Insert for Staightening Tool (Encap sulated line)

Can’t Find The Product You Need? Just Ask Us!

You May Also Like

Speed-Safe Control Line Clamp PHC Hydrus Tools

Speed-Safe Control Line Clamp

Speed-Safe Control Line Clamp

The Speed-Safe Control Line Clamp is a line of tools specifically designed for handling and securing encapsulated or bare lines. They are designed to quickly attach to any section of a control line and create a non-slip grip that allows tension up to 1,500 lbs.  They can be attached to both bare or encapsulated control lines with outside diameters from 1/4” to 5/8” and grips flat-pack lines with cross-sections up to 1-3/16” by 1-1/2”.

GET A QUOTE
PHC Hydrus Tools Logo
Speed-Safe Control Line Clamp PHC Hydrus Tools

Speed-Safe Control Line Clamp Benefits

  • Promotes safety and streamlines operation.
  • Can be used to tie-down control lines.
  • Allows control lines and TEC lines to be secured and tied-off in seconds
  • Field proven clamping device in offshore applications
  • Reusable.
  • Significantly reduces critical path operations and rig time.

Speed-Safe Control Line Clamp Options

Model NumberDescription
PHC-HYD-HET-SPEED CLAMP-1Complete Speed-Safe Clamp Assembly

Can’t Find The Product You Need? Just Ask Us!

You May Also Like

Encapsulation Stripping Tool

Encapsulation Stripping Tool

Encapsulation Stripping Tool *

For nearly 20 + years operators have been cutting their hands and fingers while stripping encapsulated lines, not to mention damaging these lines while trying to remove the tough encapsulated jackets off the lines. It’s a constant, international challenge in the completion market every single day. Not only is this preparation unsafe, it’s often very time consuming and dangerous. During stripping, the field technician/ operator, combined with the product, are in danger of being injured – – the entire process becomes quite cumbersome as well as expensive.

Pneumatic and Hydraulic has invented a line of encapsulation stripping tools that solves most of these challenges, without compromising the open blade regulation offshore: Hydrus Tools – Encapsulation Stripping Tool

GET A QUOTE
PHC Hydrus Tools Logo

Patent Pending

Don’t take our word for it. Take our clients.

Key Benefits

  • Removes encapsulation without damaging personnel and control lines.
  • Provides easy clean-up.
  • Requires no external power source.
  • Environmentally friendly and safe.
  • Built and designed to be lightweight but robust.
  • Made out of non-sparking materials and anodized for hazardous areas.
  • Enclosed cutting areas promote safe operations that decrease critical path operations and rig time, as well as potential safety hazards.

Hydrus Tools encapsulation stripping tools are safe, reliable method of removing encapsulation material from single and multi-line flat packs. The design of the tool allows for the encapsulation to be removed without damage to the control lines and affords easy clean up after stripping. The tool is a self contained, simple hand operated device that requires no external power source. A simple pull of the tool’s handle is all that is required. Our tool is lightweight, anodized and is constructed of non-sparking materials, allowing its use in most hazardous areas. All cutting areas are enclosed, promoting safe and secure operations that significantly decrease critical path operations and rig time.

Model NumberDescription
PHC-HYD-STRIP-325-1-81/8" T - 0.325 Stripping Tool
PHC-HYD-STRIP-410-1-41/4" T - 0.410 Stripping Tool
PHC-HYD-STRIP-433-1-41/4" T - 0433 Stripping Tool
PHC-HYD-STRIP-1225-560PHC-HYD-STRIP-1225-560 (Umbilical Line)
PHC-HYD-STRIP-480-5-165/16" WR - Stripping Tool
PHC-HYD-STRIP-535-3-83/8" T - 0.535 Stripping Tools
PHC-HYD-STRIP-660-1-21/2" T - 0.660 Stripping Tool
PHC-HYD-STRIP-780-5-85/8" T - 0.780 Stripping Tool
PHC-HYD-STRIP-970-540Dual 3/8" T - Stripping Tool
PHC-HYD-STRIP-990-5353/8" T + 1/4" T - Stripping Tools
PHC-HYD-STRIP-710-410Dual 1/4" T - Stripping Tool
PHC-HYD-STRIP-1035-480(2) 1/4"T + 5/16" WR Stripping Tool
PHC-HYD-STRIP-990-410(3) 1/4" T - Stripping Tool
PHC-HYD-IMPACT-1225-560IMPACT STRIPPER
PHC-HYD-STRIP-CUT-WHEELUpper & Lower Cutting Wheel Set (2) for Hydrus Strippers

Can’t Find The Product You Need? Just Ask Us!

You May Also Like